V.K. Yadav, V.Gaur*, IV Singh, “Combined effect of residual and mean stresses on fatigue behavior of welded aluminum 2024 alloy” International Journal of Fatigue (2021) 106565. SCI, I.F. 5.2
J.Jena, S.K.Singh,V.Gaur*, IV Singh, “Combined effect of residual and mean stresses on fatigue behavior of welded
aluminum 2024 alloy”, Engineering Fracture Mechanics 253 (2021) 107847. SCI, I.F. 4.4
V.Gaur*, V.Doquet, J.Kittel, E.Persent, E.Roguet, “Corrosion fatigue behavior of Cr‑Mo steel under biaxial tension”, Fatigue & Fracture of Engineering Materials & Structures (2020) 1-11. SCI, I.F. 3.5
V.K. Yadav, V.Gaur*, IV Singh, “Effect of post‑weld heat treatment on mechanical properties and fatigue crack
growth rate in welded AA‑2024” Materials Science and Engineering A 779 (2020) 139116. SCI, I.F. 5.2
V.Gaur*, F.Briffod, M. Enoki, “Micro‑mechanical investigation of fatigue behavior of Al‑alloys containing surface/superficial defects”, Materials Science and Engineering A 775 (2020) 138925. SCI, I.F. 5.2
V.Gaur*, M. Enoki, T. Okada, S. Yomogida, “Physically short and long‑crack growth behavior of MIG welded Al‑
5.8%Mg alloy”, Engineering Fracture Mechanics 209 (2019) 301‑316. SCI, I.F. 4.4
V.Gaur*, M. Enoki, T. Okada, S. Yomogida, “A study on fatigue behavior of MIG‑welded Al‑Mg alloy with different
filler‑wire materials under mean stress”, International Journal of fatigue 107 (2018) 119‑129. SCI, I.F. 5.2
V.Gaur*, V.Doquet, E.Persent, E.Roguet, “Effect of biaxial cyclic tension on the fatigue life and damage mechanisms of Cr‑Mo steel”, International journal of fatigue 87 (2016) 124‑131. SCI, I.F. 5.2
V.Gaur*, V.Doquet, E.Persent, C.Mareau, E.Roguet, J.Kittel, “Surface versus internal fatigue crack initiation in steel: Influence of mean stress”, International journal of fatigue 82 (2016) 437‑448. SCI, I.F. 5.2
PROCEEDiNGS iN INTERNATiONAL CONFERENCES
V. Gaur*, F. Briffod, M. Enoki, “Prediction of fatigue lives of aluminum alloys using crystal plasticity framework”,
In Proc. of 9𝑡ℎ International Conference on Advances in Applied Physics & Materials Science, Oludeniz ‑ Turkey (2019).
V. Gaur*, M. Enoki, T. Okada, S. Yomogida, “A Crack growth study of MIG‑welded Al‑Mg alloy”, In Proc. of 18𝑡ℎ
International Conference on New Trends in Fatigue and Fracture, Lisbon ‑ Portugal (2018).
V. Gaur*, M. Enoki, T. Okada, S. Yomogida, “Fatigue life and crack growth behavior of post welded Aluminum 5183
alloy”, In Proc. of 12𝑡ℎ International fatigue congress, MATEC Web of conferences 165, Poitiers ‑ France (2018).
V. Gaur*, M. Enoki, T. Okada, S. Yomogida, “Influence of Weld Parameters and Filler‑Wire on Fatigue Behavior of
MIG‑Welded Al‑5083 Alloy”, In Proc. of the 17𝑡ℎ International Conference on New Trends in Fatigue and Fracture,
209‑214, Springer ISBN 978‑3‑319‑70365‑7, Cancun ‑ Mexico (2017).
V. Gaur*, M. Enoki, “A new model for mean‑stress effect on fatigue performance”, In Proc. of 161𝑠𝑡 JIM (Japan
Institute of Metals) Meeting at Hokkaido University, Hokkaido ‑ Japan (2017).
V.Gaur*, V.Doquet, E.Roguet, E.Persent, “Fatigue behaviour of Cr‑Mo steel in air and in salt water under biaxial
tension”, In Proc. of International Conference on Fatigue Damage of Structural Materials XI, Hyannis ‑ USA (2016).
V.Gaur*, V.Doquet, E.Roguet, E.Persent, “A fatigue criterion to describe the combined effects of biaxial tension
and mean stress”, In Proc. of 11𝑡ℎ International Conference on Multiaxial Fatigue & Fracture, Seville ‑ Spain (2016).
V.Gaur*, V.Doquet, E.Persent, E.Roguet, “Fatigue of clip connectors for offshore drilling risers under combined
influence of high mean stress and biaxial tension”, In Procedia engineering 133, 90‑101, Fatigue design, Senlis ‑
France (2015).
V.Gaur*, V.Doquet, E.Roguet, E.Persent, “Biaxial fatigue of clip connectors for offshore drilling risers under high
mean stress”, In Proc. of 4𝑡ℎ International Conference on Fracture, Fatigue and Wear, 7‑12, Ghent ‑ Belgium
(2015).
V.Gaur*, A. Ngassa, V.Doquet, E.Roguet, E.Persent, Fatigue of clip connectors for offshore oil drilling risers under
biaxial tension”, Poster In proc. 14𝑡ℎ International conference on Fatigue design & Material defects, Paris ‑ France
(2014).
Ph.D THESiS
V.Gaur*. “Fatigue and corrosion‑fatigue in Cr‑Mo steel in biaxial tension”. Mechanics [physics] English. ffNNT :
2016SACLX027. HAL Id: tel‑01438984. Université Paris‑Saclay (2016).
